|
| |
TM 9-2320-364-34-4
25-95
(58)
Install fork (22) and fork pin (25) in housing
assembly (15).
(59)
Stake retaining pin (25) on largest diameter
end.
Adhesives, solvents, and sealing
compounds can burn easily, can
give off harmful vapors, and are
harmful to skin and clothing. To
avoid injury or death, keep away
from open fire and use in well-
ventilated area. If adhesive,
solvent, or sealing compound
gets on skin or clothing, wash
immediately with soap and
water.
(60)
Coat both ends of retaining pin (25) with
adhesive.
(61)
Install two finger forks (24) in fork (22).
Use care when installing
retaining rings. Retaining rings
are under tension and can act as
projectiles when released and
could cause severe eye injury.
(62)
Install clutch gear (23) on fork (22) with
retaining ring (21).
(63)
Install taper bearings (19) and (20) on split
torque (17).
19
17
20
|
