|
| |
TM 9-2320-364-34-4
25-100
25-16. AXLE NO. 2 DIFFERENTIAL ASSEMBLY REPAIR (CONT).
e.
Installation.
(1)
Install screw (14) and wire to fasten
fork (15) in engaged position.
Adhesives, solvents, and sealing
compounds can burn easily, can
give off harmful vapors, and are
harmful to skin and clothing. To
avoid injury or death, keep away
from open fire and use in well-
ventilated area. If adhesive,
solvent, or sealing compound
gets on skin or clothing, wash
immediately with soap and
water.
(2)
Coat threads of two studs (12) with sealing
compound.
(3)
Install two studs (12) in differential
assembly (7). Tighten studs to 76 lb-ft
(103 N.m).
NOTE
Perform Step (4) only if studs
were removed.
(4)
Coat threads of studs (6) with sealing
compound.
(5)
Install studs (6) in axle housing (8). Tighten
studs to 76 lb-ft (103 N.m).
12
7
8
6
|
