|
| |
TM 9-2320-364-34-4
25-101
Differential assembly weighs 450
lbs (204 kg). Attach suitable
lifting device prior to installation
to prevent possible injury to
personnel.
(6)
Attach lifting device to differential
assembly (7).
(7)
With the aid of an assistant, remove six
nuts (11) and screws (10) from differential
assembly (7) and differential assembly
adapter.
Adhesives, solvents, and sealing
compounds can burn easily, can
give off harmful vapors, and are
harmful to skin and clothing. To
avoid injury or death, keep away
from open fire and use in well-
ventilated area. If adhesive,
solvent, or sealing compound
gets on skin or clothing, wash
immediately with soap and
water.
(8)
Coat mating surface of axle housing (8) with
adhesive.
(9)
Install differential assembly (7) in axle
housing (8).
(10)
Remove lifting device from differential
assembly (7).
(11)
Coat beveled contact face of taper rings (5)
with adhesive.
(12)
Install ten taper rings (5), 12 washers (4) and
locknuts (3). Tighten nuts to 140 to 152 lb-ft
(190 to 206 N.m).
DIFFERENTIAL
ADAPTER
7
LIFTING
DEVICE
11
10
|
