|
| |
TM 9-2320-364-34-4
25-121
(7)
Position lock washer (4) on pivot and spindle assembly (6).
(8)
With the aid of an assistant and using spanner socket, install spindle nut (5) on pivot and spindle
assembly (6). Tighten spindle nut to 247 to 290 lb-ft (335 to 393 N.m).
(9)
Remove wheel nuts (2) from studs (3).
(10)
Remove lifting device from wheel hub assembly (1).
(11)
Rotate wheel hub assembly (1) while tapping on wheel hub assembly with soft face hammer, until wheel
hub assembly is fully seated.
(12)
With the aid of an assistant, tighten spindle nut (5) on pivot and spindle assembly (6) to 247 to 290 lb-ft
(335 to 393 N.m).
(13)
With the aid of an assistant, use spanner socket to unscrew spindle nut (5) a minimum of 1/16 of a turn or
until two locking tabs of lockwasher (4) are aligned with cutouts of spindle nut.
(14)
Bend two locking tabs of lockwasher (4) into cutouts on spindle nut (5).
f.
Follow-On Maintenance:
Install planetary hub gear, (Para 25-19).
END OF TASK
|
