|
| |
TM 9-2320-364-34-4
25-126
25-22. AXLE NO. 3 LOCKING CYLINDER REPLACEMENT (CONT).
(4)
Remove four screws (9), washers (10) and
cover (11) from differential (8).
(5)
Remove plug (12) from cover (11).
(6)
Remove piston (13) and preformed
packing (14) from differential (8). Discard
preformed packing.
b.
Installation.
(1)
Apply lubricating oil to preformed
packing (14).
(2)
Install preformed packing (14) on
piston (13).
(3)
Install piston (13) in cover (11).
Adhesives, solvents and sealing
compounds can burn easily, can
give off harmful vapors and are
harmful to skin and clothing. To
avoid injury or death, keep away
from open fire and use in well-
ventilated area. If adhesive,
solvent, or sealing compound
gets on skin or clothing, wash
immediately with soap and
water.
(4)
Apply sealing compound to threads of
plug (12).
(5)
Install plug (12) in cover (11).
(6)
Coat mating surface of cover (11) with
adhesive.
(7)
Coat screws (9) with sealing compound.
(8)
Install cover (11) with four washers (10) and
screws (9) on differential (8).
|
