|
| |
TM 9-2320-364-34-4
25-130
25-23. AXLE NO. 4 LOCKING CYLINDER REPLACEMENT (CONT).
b.
Installation.
Adhesives, solvents and sealing
compounds can burn easily, can
give off harmful vapors and are
harmful to skin and clothing. To
avoid injury or death, keep away
from open fire and use in well-
ventilated area. If adhesive,
solvent, or sealing compound
gets on skin or clothing, wash
immediately with soap and
water.
(1)
Coat mating surface of locking cylinder (14)
with adhesive.
(2)
Position locking cylinder (14) on
differential (17).
(3)
Install plastic washer (13), washer (12) and
screw (11) on locking cylinder (14).
NOTE
Screw is installed so that only
three or four threads of screw
are engaged. Screw is installed
only to keep screw hole in
locking cylinder aligned with
differential.
(4)
Position screw (8) and washer (9) on locking
cylinder (14).
(5)
Tighten screw (11) to 25 to 32 lb-ft
(34 to 43 N.m).
8
9
15
17
13
12
11
14
|
