|
| |
TM 9-2320-364-34-4
25-146
Materials/Parts
Adhesive (Item 1, Appendix B)
Dye, Prussian Blue (Item 20, Appendix B)
Grease (Item 22, Appendix B)
Oil, Lubricating (Item 36, Appendix B)
Sealing Compound (Item 59, Appendix B)
Sealing Compound (Item 60, Appendix B)
Solvent, Drycleaning (Item 68, Appendix B)
Wire, Nonelectrical (Item 79, Appendix B)
Locknut (16) (Item 215, Appendix E)
Nut, Adjusting (Item 307, Appendix E)
Nut, Spanner (Item 313, Appendix E)
Nut, Spanner (Item 314, Appendix E)
Nut, Spanner (Item 315, Appendix E)
Pump Assembly (Item 456, Appendix E)
Ring, Retaining (Item 499, Appendix E)
Ring, Retaining (Item 500, Appendix E)
Ring, Retaining (Item 501, Appendix E)
Seal, Oil (Item 598, Appendix E)
Shim Kit, Adjusting (Item 635, Appendix E)
Shim Kit, Adjusting (Item 639, Appendix E)
Shim Kit, Adjusting (Item 640, Appendix E)
Shim Kit, Adjusting (Item 642, Appendix E)
Shim Kit, Adjusting (Item 643, Appendix E)
Sleeve (Item 647, Appendix E)
This task covers:
a. Removal
c. Cleaning/Inspection
e. Installation
b. Disassembly
d. Assembly
f. Follow-On Maintenance
INITIAL SETUP
Personnel Required
Two
Equipment Condition
Axle No. 3 rear flange assembly removed,
(Para 25-26)
Tools and Special Tools
Tool Kit, General Mechanic’s
(Item 240, Appendix F)
Adapter, Maintenance Stand, Differential
(Item 3, Appendix F)
Compressor Unit, Air (Item 35, Appendix F)
Driver (Item 50, Appendix F)
Gage, Depth, Micrometer
(Item 73, Appendix F)
Gloves, Chemical Oil Protective
(Item 81, Appendix F)
Goggles, Industrial (Item 83, Appendix F)
Gun, Airblow (Item 86, Appendix F)
Hammer, Hand, Soft Plastic
(Item 88, Appendix F)
Indicator, Dial, Set w/Magnetic Base
(Item 98, Appendix F)
Multiplier, Torque (Item 141, Appendix F)
Pliers, Retaining Ring (Item 155, Appendix F)
Pliers, Retaining Ring (Item 157, Appendix F)
Press, 60 Ton (Item 164, Appendix F)
Micrometer, Outside, Caliper, Set
(Item 170, Appendix F)
Puller Kit, Universal Slide Hammer
(Item 175, Appendix F)
Socket, 63 mm (Item 218, Appendix F)
Spanner (Item 222, Appendix F)
Spanner (Item 223, Appendix F)
Spanner (Item 224, Appendix F)
Stand, Maintenance, Engine
(Item 226, Appendix F)
Wrench Set, Socket, 3/4 in. Drive
(Item 274, Appendix F)
Wrench, Torque (0-60 N.m)
(Item 276, Appendix F)
Wrench, Torque (0 to 175 lb-ft [0-237 N.m])
(Item 277, Appendix F)
25-28. AXLE NO. 3 DIFFERENTIAL ASSEMBLY REPAIR.
Tools and Special Tools - Continued
Wrench, Torque (0 to 600 lb-ft [0-814 N.m])
(Item 278, Appendix F)
Lifting Device
(Minimum Capacity 500 lbs [227 kg])
Adapter, Differential Preload (Appendix C)
Extractor, Jet (Appendix C)
Holder, Flange (Appendix C)
|
