| |
TM 9-2320-364-34-4
25-147
a.
Removal.
(1)
Remove nut (1) from rear output
assembly (2).
(2)
Remove six screws (3) from rear output
assembly (2).
(3)
Remove screw (4) and bracket (5) from rear
output assembly (2).
(4)
Remove rear output assembly (2) from
differential assembly (6).
(5)
Remove four locknuts (7) and washers (8)
from studs (9). Discard locknuts.
NOTE
Perform Step (6) and (7) only if
nut or stud is damaged.
(6)
Remove nut (10) from stud (11).
(7)
Remove stud (11) from axle housing (15).
(8)
Remove ten locknuts (12) from studs (13).
Discard locknuts.
|