|
| |
TM 9-2320-364-34-4
25-161
(8)
The new adjusting shim (70) thickness will be: Step (5) distance – Step (6) distance = amount of shim
thickness to be added to old adjusting shim thickness to create new adjusting shim kit. Proceed to
Step (10).
(9)
The new adjusting shim (70) thickness will be: Step (6) distance – Step (5) distance = amount of shim
thickness to be removed from old adjusting shim thickness to create new adjusting shim kit. Proceed to
Step (10).
(10)
Assemble new adjusting shim (70) to thickness determined per Step (7).
(11)
Install adjusting shim (70) in bearing housing (69).
(12)
Apply grease to bearing race (67).
(13)
Install bearing race (67) in bearing housing (69).
(14)
Apply grease to bearing race (68).
(15)
Install bearing race (68) in bearing housing (69).
(16)
Install bearing housing (69) on housing (26) with eight screws (71). Tighten screws to 80 lb-ft (108 N.m).
|
