|
| |
TM 9-2320-364-34-4
25-168
25-28. AXLE NO. 3 DIFFERENTIAL ASSEMBLY REPAIR (CONT).
(55)
Measure bearing (51) thickness and record
as dimension “B”.
Use care when installing
retaining rings. Retaining rings
are under tension and can act as
projectiles when released
causing injury to personnel.
(56)
Install retaining ring (49) in ring and pinion
assembly (38). Using depth micrometer,
measure distance between face of retaining
ring (49) and bottom face of ring and pinion
assembly (38) and record as dimension “A”.
(57)
Subtract dimension “B” from dimension “A”
to get dimension “C” (C = A – B). Subtract
0.004 in. (0.102 mm) from dimension “C” to
get dimension “D” (D = C – 0.004 in. [0.102
mm]). Dimension “D” is adjusting shim (50)
thickness.
Use care when removing
retaining rings. Retaining rings
are under tension and can act as
projectiles when released
causing injury to personnel.
(58)
Remove retaining ring (49) from ring and
pinion assembly (38).
(59)
Install bearing (51) and adjusting shim (50)
in ring and pinion assembly (38) with
retaining ring (49).
(60)
Install deflector (48) in ring and pinion
assembly (38).
|
