|
| |
TM 9-2320-364-34-4
25-169
Ring and pinion assembly weighs
60 lbs (27 kg). Attach a suitable
lifting device prior to removal to
prevent possible injury to
personnel.
(61)
Attach lifting device to ring and pinion
assembly (38).
(62)
Install ring and pinion assembly (38) in
housing (26).
(63)
Remove lifting device from ring and pinion
assembly (38).
(64)
Using spanner socket, install spanner
nut (47). Tighten spanner nut to 325 to 362
lb-ft (441 to 491 N.m). Stake spanner nut.
Use care when installing
retaining rings. Retaining rings
are under tension and can act as
projectiles when released
causing injury to personnel.
(65)
Install sun gear (46) and washer (45) on
pinion shaft (1) with retaining ring (44).
|
