|
| |
TM 9-2320-364-34-4
25-186
25-29. AXLE NO. 4 DIFFERENTIAL ASSEMBLY REPAIR (CONT).
NOTE
Each taper bearing is part of its
own matched set with a bearing
race.
(17)
Using gear puller, remove two taper
bearings (19) and (20) from split
torque (17).
Use care when removing
retaining rings. Retaining rings
are under tension and can act as
projectiles when released
causing injury to personnel.
(18)
Remove retaining ring (21) from fork (22).
(19)
Remove clutch gear (23) from fork (22).
(20)
Remove two finger forks (24) from fork (22).
(21)
Punch out fork pin (25) and remove
fork (22) from housing assembly (15).
(22)
Remove retaining ring (26) from fork (27).
(23)
Remove clutch gear (28) from fork (27).
(24)
Remove two finger forks (29) from
fork (27).
(25)
Punch out fork pin (30) and remove
fork (27) from housing assembly (15).
|
