|
| |
TM 9-2320-364-34-4
26-3
a.
Disassembly.
(1)
Remove four screws (1), lockwashers (2),
intake manifold (3) and two gaskets (4) from
cylinder block (5). Discard gaskets.
NOTE
Perform Step (2) if plugs are
damaged.
(2)
Remove two plugs (6) and six plugs (7) from
cylinder head (8).
(3)
Remove 18 screws (9) from cylinder
head (8).
(4)
Matchmark and remove cylinder head (8)
and gasket (10) from cylinder block (5).
Discard gasket.
Use care when removing springs
from plastic retainers in cylinder
head or damage to equipment
may result.
(5)
Remove four springs (11) from cylinder
head (8).
|
