|
| |
TM 9-2320-364-34-4
26-4
26-2. AIR COMPRESSOR REPAIR (CONT).
(6)
Remove four valves (12) and valve
guides (13) from cylinder block (5).
(7)
Remove two spring saddles (14), springs (15)
and four plungers (16) from cylinder
block (5).
(8)
Position cylinder block (5) over, with
crankcase (17) side up.
(9)
Remove ten screws (18) and
lockwashers (19) from crankcase cover (20)
and crankcase (17). Discard lockwashers.
(10)
Matchmark and remove crankcase
cover (20) and gasket (21) from
crankcase (17). Discard gasket.
NOTE
Tag and mark all screws, rod
caps and bearing halves during
removal.
(11)
Remove eight screws (22), four rod caps (23)
and lower bearing halves (24) from
connecting rods (25) and crankshaft (26).
(12)
Rotate crankshaft (26) to remove connecting
rods (25) from crankshaft (26).
|
