|
| |
TM 9-2320-364-34-4
26-5
(13)
Position cylinder block (5) with
crankcase (17) side down.
NOTE
Perform Step (14) if plugs are
damaged.
(14)
Remove six plugs (27) from cylinder
block (5).
(15)
Remove ten screws (28) and
lockwashers (29) from cylinder block (5)
and crankcase (17). Discard lockwashers.
NOTE
Piston and rod assemblies will
stay with cylinder block.
(16)
Matchmark and remove cylinder block (5)
and gasket (30) from crankcase (17).
Discard gasket.
(17)
Remove four pistons (31) and connecting
rods (25) as assemblies from bottom of
cylinder block (5).
NOTE
Tag and mark upper bearing
halves upon removal.
(18)
Remove upper bearing halves (32) from
connecting rods (25).
|
