|
| |
TM 9-2320-364-34-4
26-12
26-2. AIR COMPRESSOR REPAIR (CONT).
NOTE
Locating tabs on bearing halves
are installed in notches of rod
caps.
(14)
Install four lower bearing halves (24) in rod
caps (23).
(15)
Coat journals of crankshaft (26) with
lubricating oil.
Adhesives, solvents, and sealing
compounds can burn easily, can
give off harmful vapors, and are
harmful to skin and clothing. To
avoid injury or death, keep away
from open fire and use in a well-
ventilated area. If adhesive,
solvent, or sealing compound
gets on skin or clothing, wash
immediately with soap and
water.
(16)
Apply sealing compound to threads of eight
screws (22).
(17)
Install four rod caps (23) over journals of
crankshaft (26) on connecting rods (25) with
eight screws (22). Tighten screws to 105 to
135 lb-in (12 to 15 N.m).
(18)
Apply sealing compound to threads of ten
screws (18).
(19)
Install gasket (21) and crankcase cover (20)
on crankcase (17) with ten lockwashers (19)
and screws (18). Tighten screws to 110 to
150 lb-in (12 to 17 N.m).
(20)
Position crankcase (17) and cylinder
block (5) with crankcase (17) side down.
|
