|
| |
TM 9-2320-364-34-4
26-13
(21)
Install four plungers (16), two spring
saddles (14) and springs (15) in cylinder
block (5).
(22)
Install four valve guides (13) and valves (12)
in cylinder block (5).
(23)
Install four springs (11) in cylinder head (8).
Adhesives, solvents, and sealing
compounds can burn easily, can
give off harmful vapors, and are
harmful to skin and clothing. To
avoid injury or death, keep away
from open fire and use in a well-
ventilated area. If adhesive,
solvent, or sealing compound
gets on skin or clothing, wash
immediately with soap and
water.
(24)
Apply sealing compound to threads of 18
screws (9).
(25)
Install gasket (10) and cylinder head (8) on
cylinder block (5) with 18 screws (9).
Tighten screws to 13 lb-ft (18 N.m) in
sequence shown.
NOTE
Perform Step (26) if plugs were
removed.
(26)
Apply sealing compound to threads of two
plugs (6) and six plugs (7) and install plugs
in cylinder head (8).
|
