|
| |
TM 9-2320-364-34-4
27-12
27-3. FRONT AND REAR STEERING GEAR REPAIR (CONT).
(5)
Remove preformed packing (8) from
cover (2). Discard preformed packing.
NOTE
Perform Step (6) if roller bearing
is damaged.
(6)
Remove roller bearing (9) from cover (2).
Use care when removing
retaining rings. Retaining rings
are under tension and can act as
projectiles when released
causing injury to personnel.
NOTE
Perform Step (7) if roller bearing
is damaged.
(7)
Remove retaining ring (11) and roller
bearing (10) from gear housing (1).
NOTE
Perform Step (8) only if gear is
damaged.
(8)
Position shaft (7) in press and press
gear (12) off of shaft (7).
NOTE
Perform Steps (9) and (10) only
if gear was removed.
(9)
Remove shaft (7) from press.
(10)
Remove pins (13) and (14) from gear (12).
Discard pins.
|
