|
| |
TM 9-2320-364-34-4
27-19
Use care when removing snap
and retaining rings. Snap and
retaining rings are under spring
tension and can act as projectiles
when released and could cause
severe eye injury.
NOTE
Perform Step (34) if bearing was
removed.
(34)
Install retaining ring (11) and roller
bearing (10) until bearing (10) is flush with
inner face of gear housing (1).
NOTE
Perform Step (35) if bearing was
removed.
(35)
Install roller bearing (9) in cover (2).
(36)
Apply grease to inner surface of roller
bearings (9) and (10).
|
