| |
TM 9-2320-364-34-4
27-18
27-3. FRONT AND REAR STEERING GEAR REPAIR (CONT).
(23)
Apply hydraulic oil to preformed
packing (19).
(24)
Install preformed packing (19) on cylinder
head (4).
(25)
Align matchmarks and position cylinder
head (4) on gear housing (1).
(26)
Coat threads of 10 screws (17) with sealing
compound.
(27)
Install ten lockwashers (18) and screws
(17) in cylinder head (4). Tighten screws
to 20 to 30 lb-ft (27 to 41 N.m).
(28)
Apply hydraulic oil to preformed
packing (16).
(29)
Install preformed packing (16) on valve
(15).
(30)
Install valve (15) in cylinder head (4).
Tighten valve six turns.
NOTE
Perform Steps (31) through (33)
if gear was removed.
(31)
Align timing marks and position shaft (7) in
press and press gear (12) on shaft (7).
(32)
Remove shaft (7) from press.
(33)
Install pins (13) and (14) in gear (12) and
shaft (7).
|