|
| |
TM 9-2320-364-34-4
28-29
(10)
Apply hydraulic oil to backup ring (18),
preformed packing (17), backup ring (15),
preformed packing (16) and backup ring
(15) and install on holding valve (13).
(11)
Apply hydraulic oil to preformed
packing (14).
(12)
Install preformed packing (14) and holding
valve (13) in manifold (5) or (10).
(13)
Tighten holding valve (13) to 50 to 55 lb-ft
(68 to 75 N.m).
(14)
Apply hydraulic oil to preformed
packing (12).
(15)
Install plug (11) and preformed packing (12)
in manifold (5) or (10).
NOTE
Fittings for left and right side
telescope cylinders are different.
Perform Step (16) for left side
cylinder and Step (17) for right
side cylinder.
(16)
Apply hydraulic oil to three preformed
packing (9) and (4).
(17)
Install three preformed packings (9),
adapter (8), elbows (7) and (6) in left side
telescope cylinder manifold (10).
(18)
Install three preformed packings (4), two
elbows (2) and (3) and tee (1) in right side
telescope cylinder manifold (5).
END OF TASK
|
