|
|
![]() TM 9-2330-385-14
Remove all jewelry such as rings, dog tags, bracelets, etc. If jewelry or tools contact positive electrical
circuits, a direct short may result. Damage to equipment, injury, or death to personnel may occur.
CONTINUITY TEST
(1) Set multimeter select switch to ohms.
(2) Is there continuity between taillight
socket ground and a known
good ground?
(a) If there is no continuity,
replace rear composite light
(b) If there is continuity, fault
not corrected. Perform Steps
(3) and (4) below and notify
DS Maintenance.
(3) Install lamp in taillight socket.
(4) Install preformed packing, composite
light cover, and tighten six
captive screws.
|
Privacy Statement - Press Release - Copyright Information. - Contact Us |