|
|
TM 9-2330-385-14
Remove all jewelry such as rings, dog tags, bracelets, etc. If jewelry or tools contact positive electrical circuits,
a direct short may result. Damage to equipment, injury, or death to personnel may occur.
CONTINUITY TEST
(1) Is there continuity between wire
1435-23 and a known good ground?
(a) If there is no continuity, repair wire
1435-23 (see schematic,
marker harness (Para 4-30).
(b) If there is continuity, wire 1435-23
is OK.
CONTINUITY TEST
(1) Disconnect wire 1012-24 connector.
(2) Is there continuity between front side
marker light socket center contact
and connector?
(a) If there is no continuity, replace
front side marker light (Para 4-27).
(b) If there is continuity, front side
marker light is OK.
(3) Install light lamp.
(4) Install front side marker light lens and
two screws.
|
Privacy Statement - Press Release - Copyright Information. - Contact Us |