|
|
![]() TM 9-2330-385-14
Remove all jewelry such as rings, dog tags, bracelets, etc. If jewelry or tools contact positive electrical
circuits, a direct short may result. Damage to equipment, injury, or death to personnel may occur.
CONTINUITY TEST
(1) Disconnect LED composite light
ground wire pigtail from LED composite
light ground wire.
(2) Connect positive (+) multimeter lead
to LED composite light ground wire
pigtail.
(3) Connect negative (- ) multimeter lead
-
to a known good ground.
(4) Set multimeter select switch to ohms.
(5) Is continuity measured between LED
composite light ground wire pigtail and
a known good ground?
(a) If there is no continuity, replace LED
composite light ground wire pigtail
(b) If there is continuity, perform
Step (6) below and go to Step 6
of this Fault.
(6) Connect LED composite light
ground wire pigtail to LED composite
light ground wire.
|
Privacy Statement - Press Release - Copyright Information. - Contact Us |