Front/Side LED Marker Light/Bracket Replacement.

TM 9-2330-385-14

4-27.1. FRONT/SIDE/REAR LED MARKER LIGHT/BRACKET REPLACEMENT

(S/N YB6122 075 AND UP) (CONT).

NOTE

Front and side marker lights are removed the same way on both sides. Left side marker

light shown.

Tag and mark all wires prior to removal.

(d)

Disconnect 489 connector (6) from

1012B connector (7).

(e)

Remove screw (8), pigtail ground (9),

locknut (10), and wire 1435 (11) from

mounting base (3) and bracket (12).

Discard locknut.

NOTE

Perform Step (f) for side marker

lights. Perform Step (g) for front

marker lights.

(f)

Remove screw (13), locknut (14),

mounting base (3), and gasket (15)

from bracket (12). Discard locknut.

(g)

Remove screw (13), reflector

mounting bracket (16), locknut (14),

mounting base (3), and gasket (15)

from bracket (12). Discard locknut.

NOTE

Perform Step (h) only if replacing

reflector (19).

(h)

Remove locknut (17), screw (18), and reflector (19) from reflector mounting bracket (16).

Discard locknut.

(i)

Remove two locknuts (20), screws

(21), washers (22), and bracket (12)

from trailer arm (23). Discard

locknuts.

(2)

Installation.

(a)

Install bracket (12) on trailer arm (23)

with two washers (22), screws (21),

and locknuts (20).

4-344.2