Rear/Side LED Marker Light Replacement.

TM 9-2330-385-14

4-27.1. FRONT/SIDE/REAR LED MARKER LIGHT/BRACKET REPLACEMENT

(S/N YB6122 075 AND UP) (CONT).

Rear/Side LED Marker Light Replacement.

(1)

Removal.

NOTE

If only replacing LED, perform

Steps (a) through (c).

(a)

Remove two screws (1) and outer

bracket (2) from mounting base (3).

(b)

Remove LED (4) from mounting base (3) by turning LED 1/4 turn counter-clockwise.

(c)

Disconnect pigtail (5) from LED (4).

NOTE

Rear and side marker lights are removed the same way on both sides. Left rear side

marker light is shown.

Tag and mark all wires prior to removal.

(d)

Remove locknut (6), wire 1435 (7), washer (8), screw (9), and pigtail ground (10) from mounting

base (3) and bracket (11). Discard locknut.

(e)

Disconnect 489 connector (12) from 1012B connector (13).

(f)

Remove locknut (14), washer (15), screw (16), mounting base (3), and gasket (17) from bracket

(11). Discard locknut.

4-344.4