Installation. -725550641

TM 9-2330-385-14

NOTE

For removal of rear facing LED marker light bracket (22), perform Steps (g) and (h).

(g)

Remove two screws (18),

lockwashers (19), and washers (20),

from brackets (21) and (22), and

housing (23). Discard lockwashers.

(h)

Remove bracket (22) from in-between

bracket (21) and housing (23).

(2)

Installation.

NOTE

Perform Step (a) only if rear

facing LED marker light bracket

(22) was removed.

(a)

Install housing (23) and bracket (22) on bracket (21) with two washers (20), lockwashers (19), and

screws (18).

(b)

Install gasket (17) and mounting base (3) on bracket (11) with screw (16), washer (15), and locknut

(14).

(c)

Install pigtail ground (10), washer (8), and wire 1435 (7) on bracket (11) and mounting base (3)

with screw (9) and locknut (6).

(d)

Connect 489 connector (12) on 1012B connector (13).

4-344.5