 |
|||
|
|
|||
|
|
|||
| ||||||||||
|
|
 TM 9-2330-385-14
4-36. SLACK ADJUSTER REPLACEMENT (CONT).
Use care when removing
retaining rings. Retaining rings
are under tension and can act as
projectiles when released and
could cause severe eye injury.
(2)
Remove retaining ring (6), washer (7), slack
adjuster (8) and washer (9) from camshaft
end (10).
NOTE
If the original slack adjuster is
installed, do not remove the clevis
in Step (3).
(3)
Loosen jam nut (11) and turn locking collar
nut (12) to remove clevis (5) from shaft (13).
(4)
Remove tie down strap (14) and boot (15)
from slack adjuster (8). Discard tie strap.
b.
Cleaning/Inspection.
(1)
Inspect camshaft (1) splines for cracks,
chipping or wear.
(2)
Inspect camshaft (1) for bends and cracks.
(3)
Replace all damaged parts.
c.
Installation.
(1)
Install clevis (1) on push rod (2).
4-426
|
|
Privacy Statement - Press Release - Copyright Information. - Contact Us |
Click
here for thousands of PDF manuals