TIRE REPAIR.

TM 9-2330-385-14

(9)

Install load lock valve (8) on bracket (11),

with two screws (10) and locknuts (9).

(10)

Install nut (7) on load lock valve (8).

Adhesives, solvents, and sealing

compounds can burn easily, can

give off harmful vapors and are

harmful to skin and clothing. To

avoid injury or death, keep away

from open fire and use in a well-

ventilated area. If adhesive,

solvent, or sealing compound

gets on skin or clothing, wash

immediately with soap and

water.

(11)

Apply sealing compound to threads of

shaft (6).

(12)

Install knob (5) on shaft (6).

(13)

Install air lines 2080 (1) and 2078 (2) on

fittings (3) and (4).

Follow-On Maintenance:

Charge air system, (Para 2-22).

Check for air leaks, (Para 4-7).

Remove wheel chocks, (Para 2-20).

END OF TASK

4-55. TIRE REPAIR.

Refer to TM 9-2610-200-14, Operator/Unit/Direct Support/General Support Maintenance Manual for Care,

Maintenance, Repair and Inspection of Pneumatic Tires and Inner Tubes.