 |
|||
|
|
|||
|
|
|||
| ||||||||||
|
|
 TM 9-2330-385-14
4-62. SPARE TIRE WINCH REPLACEMENT (CONT).
NOTE
Note position of hook on lift
assembly bracket prior to
removal to aid in installation.
(15)
Remove locknut (39), screw (40) and
hook (41) from lift assembly bracket (4).
Discard locknut.
(16)
Remove two screws (42) and cone (43) from
lift assembly bracket (4).
b.
Installation.
(1)
Install cone (43) on lift assembly bracket (4)
with two screws (42).
NOTE
Hook is properly installed when
screw and locknut are tightened
and hook rotates freely.
(2)
Install hook (41), on lift assembly
bracket (4) with screw (40) and locknut (39).
(3)
Install pulley support tube (27) on pulley
support bracket (26) and install pin (25) and
locking pin (24) in hole (28).
NOTE
Pulley support bracket is
properly installed when screw
and locknut are tightened and
bracket rotates freely.
(4)
Install spacer (38), pulley support
bracket (34), two washers (37), screw (36)
and locknut (35) on pulley support
tube (27).
(5)
Install spacer (33) on pulley (32).
NOTE
Pulley is properly installed when
screw and locknut are tightened
and pulley rotates freely.
(6)
Install pulley (32), spacer (33), two
washers (31), screw (30) and locknut (29) on
pulley support bracket (34).
4-538
|
|
Privacy Statement - Press Release - Copyright Information. - Contact Us |
Click
here for thousands of PDF manuals