Lock and Unlock Rear ISO Locks.

TM 9-3990-206-14&P

Lock and Unlock Rear ISO Locks.

Ensure all ISO container locks are unlocked before trying to load container on flatrack.

Damage to both container and ISO locks could occur if locks are not unlocked.

Ensure sideboards have been removed from flatrack before trying to load ISO container.

Damage to sideboard or ISO container may result.

(1)

Pull pin (1) from extension (2).

(2)

Rotate extension (2) back and install pin (1) in hole.

(3)

After loading ISO container, remove pin (3) from lock (4) and rotate lock upward.

(4)

Hold lock (4) in place by reinstalling pin (3) in lock (4).

e. Loading and Unloading Flatrack. Refer to TM 9-2320-364-10 for detailed procedures on loading and

unloading the flatrack using the LHS.

2-9