STACKING/LOADING THREE FLATRACKS ON PLS TRUCK OR TRAILER.

TM 9-3990-206-14&P

7-16. STACKING/LOADING THREE FLATRACKS ON PLS TRUCK OR TRAILER.

Stacking/Loading Three Flatracks.

RAISED POSITION

LADEN LIFT

EMPTY LIFT

F POCKET

EMPTY LIFT

F POCKET

LADEN LIFT

F POCKET

Flatracks must be empty when stacked. Attempting to stack loaded flatracks could cause

serious injury or death to personnel.

Only three flatracks may be stacked and loaded on the PLS truck and trailer using the Load

Handling System and a M1077 flatrack. Failure to comply may cause damage to

equipment.

(1)

Refer to Para 8-4 and remove rollers from three flatracks to be stacked.

(2)

Refer to Para 7-10 and lower front and rear walls (1) and (2) of flatrack (3).

NOTE

Sliding handle from stowage box may be used if locking handle is difficult to turn.

(3)

On lower flatrack (3), rotate locking handle (4) of four twist locks (5) 45 degrees.

(4)

Rotate twist locks (5) back to the raised position.

(5)

Rotate locking handle (4) of four twist locks (5) 45 degrees.