 |
|||
|
|
|||
|
|
|||
| ||||||||||
|
|
 TM 9-3990-206-14&P
(7)
Coat hinge pin (14) with grease.
NOTE
10
9
11
12
14
15
It may be necessary to raise
wall slightly to aid in
aligning hinge pin.
Hinge pin is installed when
1/8 in. (3.175 mm) short of
being flush with outside of
wall.
(8)
Position nut (9) on screw (10).
(9)
Position hinge pin (14) in hinge (15).
(10)
Position retainer block (12) in bracket (13).
13
(11)
Install retainer block (12) in bracket (13) with screw (10) and washer (11).
(12)
Tighten screw (10) until pin (14) is 1/8 in. (3.17 mm) from outside of wall.
Adhesives, solvents and sealing compounds can burn easily, can give off harmful vapors
and are harmful to skin and clothing. To avoid injury or death, keep away from open fire
and use in well-ventilated area. If adhesive, solvent or sealing compound gets on skin or
clothing, wash immediately with soap and water.
(13)
Apply sealing compound to threads of screw (10).
(14)
Tighten nut (9) against washer (11).
(15)
Repeat Steps (7) through (14) for other side.
10-11
|
|
Privacy Statement - Press Release - Copyright Information. - Contact Us |
Click
here for thousands of PDF manuals