Appendix F. UNIT, DIRECT SUPPORT AND GENERAL SUPPORT MAINTENANCE REPAIR PARTS AND SPECIAL TOOLS LIST (RPSTL)

TM 9-3990-206-14&P

APPENDIX F

UNIT, DIRECT SUPPORT AND GENERAL SUPPORT MAINTENANCE REPAIR

PARTS AND SPECIAL TOOLS LIST (RPSTL)

Section I. INTRODUCTION

F-1. SCOPE.

This RPSTL lists and authorizes spares and repair parts; special tools; special Test, Measurement, and Diagnostic

Equipment (TMDE); and other special support equipment required for performance of Unit, Direct Support, and

General Support Maintenance of the PLS Flatrack M1077/M1077A1 and PLS ISO Compatible Palletized Flatrack M1

(IPF). It authorizes the requisitioning, issue, and disposition of spares, repair parts and special tools as indicated by

the source, maintenance, and recoverability (SMR) codes.

F-2. GENERAL.

In addition to Section I, Introduction, this Repair Parts and Special Tools List (RPSTL) is divided into the following

sections:

a. Section II. Repair Parts List. A list of spares and repair parts authorized by this RPSTL for use in the

performance of maintenance. The list also includes parts which must be removed for replacement of the authorized

parts. Parts Lists are composed of functional groups in ascending alphanumeric sequence, with the parts in each

group listed in ascending figure and item number sequence. Bulk materials are listed by item name in FIG BULK at

the end of the section. Repair parts kits or sets are listed separately in their own functional group within Section II.

Repair parts for repairable special tools are also listed in the section. Figures 1 through 8 list the repair parts list for

PLS Flatrack M1077/M1077A1 and Figures 9 through 19 list the repair parts list for PLS M1 (IPF).

b. Section III. Special Tools List. Not Applicable. No special tools required for M1077/M1077A1 or M1

(IPF).

c. Section IV. Cross-Reference Indexes. A list, in National Item Identification Number (NIIN) sequence, of

all National stock numbered items appearing in the listings, followed by a list in alphanumeric sequence of all part

numbers appearing in the listings. National stock numbers and part numbers are cross-referenced to each illustration

figure and item number appearance.

F-3. EXPLANATION OF COLUMNS (SECTION II).

ITEM NO. [Column (1)]. Indicates the number used to identify items called out in the illustration.

b. SMR CODE [Column (2)]. The Source, Maintenance, and Recoverability (SMR) code is a 5-position code

containing supply/requisitioning information, maintenance category authorization criteria, and disposition instruction,

as shown in the following breakout:

F-1