Appendix G. ILLUSTRATED LIST OF MANUFACTURED ITEMS

TM 9-3990-206-14&P

ILLUSTRATED LIST OF MANUFACTURED ITEMS

G-1. INTRODUCTION.

This appendix includes complete instructions for manufacturing or fabricating items needed for maintenance. A part

number index in alphanumeric order is provided for cross-referencing the part number of the item to be manufactured

to the figure which covers fabrication criteria. All bulk materials needed for manufacture of an item are listed by part

number or specification number.

G-2. SIDEBOARD KIT LOCKWIRE.

The sideboard lockwire is used in 18 places. The lockwire length is the same for each application. Crimped button

stop caps are used to attach the lockwire to other components. Each application requires two swaging sleeve clips

(Item 3, Appendix E) and lockwire rope (Item 7, Appendix E).

NOTES:

1. OBTAIN ALL COMPONENTS REQUIRED TO FABRICATE SIDEBOARD KIT LOCKWIRE.

2. USE A FINE TOOTHED HACKSAW OR SUITABLE CUTTING DEVICE, AND CUT LOCKWIRE 5 IN. (127 MM) LONG.

3. SLIDE WIRE THROUGH HOLE IN COMPONENT, UNTIL LOCKWIRE COMES THROUGH OTHER SIDE.

4. SLIDE CAP ONTO LOCKWIRE, UNTIL CAP BOTTOMS AGAINST COMPONENT AND WIRE COMES THROUGH CAP.

5. CRIMP CAP TO LOCKWIRE.

Figure G-1. Sideboard Kit Lockwire.

G-1