OPERATION - Continued
Back vehicle into the water and stop when top of back tire hub is at the water line (hub is in the water). Proceed
to Step (21).
Back vehicle into the water and stop when top of back tire rim is at the water line (rim is in the water).
After entry of vehicle into the water, the parking brake may slip, allowing vehicle to roll into
deeper water resulting in damage to equipment. Use care when setting parking brake. Failure
to comply may result in damage to equipment.
Dashboard parking brake indicator illuminate out when PARKING BRAKE control is applied.
Pull out PARKING BRAKE control (Figure 9, Item 25).
Set transmission range selector (Figure 9, Item 26) to N (neutral).
Have boat crew engage all bay foldlock latches (Figure 10, Item 27) and travel latches (Figure 10, Item 28) in
the engage position.
Engage IRB Foldlock Latches.
Have boat crew attach winch cable to bridge bay as follows:
Cable hook (Figure 10, Item 29) should face rear with throat up.
Hook latch (Figure 10, Item 30) should be closed.
During bridge bay retrieval, axis of cable hook must be vertical and in line with axis of cable.
Failure to comply may result in damage to equipment.
Have boat operator maintain bridge bay in alignment with vehicle for loading.