|
| |
TM 9-2320-364-34-3
16-13
NOTE
Note location and quantity of
shims.
(3)
Remove two screws (9), washers (10),
shims (11) and wear pad (12) from base
section (4). Discard wear pad.
(4)
Remove four screws (13), washers (14) and
cover plate (15) from opposite end of base
section (4).
(5)
Remove jam nut (16), nut (17) and
washer (18) from equalizer link weldment
end (19).
(6)
Move inner-mid section (20) forward in
base section (4) approximately 10 in.
(25.4 cm).
|
