4-59. DRAWBAR LIFTING HANDLE/TOW RING/ADJUSTING PIN REPLACEMENT.
This task covers:
d. Follow-On Maintenance
Tools and Special Tools
Tool Kit, General Mechanic's: Automotive
Adhesive (Item 3, Appendix E)
(Item 50, Appendix J)
Locknut (8) (Item 24, Appendix I)
Brush, Wire (Item 1, Appendix J)
Pin, Cotter (Item 67, Appendix I)
Grinder, Electric, Portable
Pin, Cotter (2) (Item 69, Appendix I)
(Item 14, Appendix J)
Jackstand (Item 24, Appendix J)
Lifting Device Minimum Capacity 425 lbs
Wheels chocked, (Para 2-20)
Drawbar extended, (Para 2-10)
Multiplier, Torque (Item 29, Appendix J)
Drawbar extension stowed (if equipped),
Socket Set, 3/4 in. (Item 39, Appendix J)
Socket, Set Deepwell (Item 41, Appendix J)
Socket, 3 1/8 in. (Item 43, Appendix J)
Wrench, Torque (0 to 600 lb-ft [0-813 N.m])
(Item 62, Appendix J)
Drawbar weighs 425 lbs (193 kg), (850 lbs (386 kg) with drawbar extension, if equipped).
Attach suitable lifting device prior to removal to prevent possible injury to personnel.
Support drawbar (1) in level position on jackstand.
Remove four upper locknuts (2), screws (3) and two handles (4) and (5) from plate (6) and drawbar (1).