Drycleaning Solvent (P-D-680) is TOXIC and flammable. Wear protective goggles, face
shield, and gloves; use only in a well-ventilated area; avoid contact with skin, eyes, and
clothes, and do not breathe vapors. Keep away from heat or flame. Never smoke when
using solvent; the flashpoint for Type II Drycleaning Solvent is 140 degrees F (60 degrees C)
and Type III Drycleaning Solvent is 200 degrees F (93 degrees C). Failure to do so may
result in injury or death to personnel.
If personnel become dizzy while using cleaning solvent, immediately get fresh air and
medical help. If solvent contacts skin or clothes, flush with cold water. If solvent contacts
eyes, immediately flush eyes with water and get immediate medical attention.
(1) Use drycleaning solvent (Item 14, Appendix E) to clean or wash grease or oil from all metal parts. All
surfaces must be clean to ensure removal of corrosion, soil, grease or residues.
(2) After cleaning, use cold water to rinse flatrack. Dry all parts thoroughly with a lint-free cloth (Item 4,
Spot paint all surfaces as necessary (TB 43-0209).
Refer to Appendix K for lubrication instructions pertaining to the flatrack.
9-6. LOOSE PARTS INSTALLATION.
Refer to Para 8-4 for procedures to install the roller assemblies.
9-7. HAND RECEIPT.
Refer to Appendix C, Components of End Item (COEI) and Basic Issue Items (BII) List and Appendix D, Additional
Authorization List (AAL), for proper inventory and control procedures.