Figure 8. Marker Light and Headlight.

II113300-1-103

Rev. A

Marker Light Housing

Marker Light (LED Type)

Headlight Mounting Holes (2 of 3)

(Headlight has been removed)

Figure 8. Marker Light and Headlight.

Remove the Weight Marker (see Figure 6). This is done by removing the two bolts

connecting it to the back of the Upper Brush Guard rail structure.

k) Remove the Clearance Light Bar located on the front of the cab just under the roof line

(see Figure 6 and Figure 14). From the inside of the cab, cut the Cab Top Clearance

Light Bar wire lead approximately 6 in. from the exit hole. Install a closed-end wire

connector on the end of the wire (inside the cab), fold the wire inward, and secure it in

place with a wire tie. Remove the six screws holding the Cab Top Clearance Light Bar

to the cab roof overhang at the top of the windshield, and remove the Cab Top

Clearance Light Bar from the vehicle.

0037 00-33