DRAFT
TB 9-2320-364-13&P-1
AC HEATER/EVAPORATOR BLOWER MOTOR RESISTOR REPLACEMENT -
Continued
REMOVAL
PLSAC072
NOTE
Tag and mark wire and connector prior to removal to ensure proper installation.
1. Remove screw (1), lockwasher (2), washer (3), and ground wire (4) from heater/evaporator (5). Discard
lockwasher.
2. Remove three screws (6), lockwashers (7), washers (8), and cover (9) from heater/evaporator (5).
Discard lockwashers.
PLSAC073
3. Disconnect connector (10) from resistor (11).
4. Remove two screws (12) and resistor (11) from bracket (13).
0035-2
