DRAFT
TB 9-2320-364-13&P-1
AC HEATER/EVAPORATOR BLOWER MOTOR RESISTOR REPLACEMENT -
Continued
INSTALLATION
PLSAC073
1. Install resistor (11) on bracket (13) with two screws (12).
2. Connect connector (10) to resistor (11).
PLSAC072
3. Install cover (9) on heater/evaporator (5) with three washers (8), lockwashers (7), and screws (6).
4. Install ground wire (4) on heater/evaporator (5) with washer (3), lockwasher (2), and screw (1).
0035-3
