TB 9-2320-364-13&P-2
DOOR ASSEMBLY REPLACEMENT - CONTINUED
0015 00
REMOVAL
1.
Open door assembly and remove bolt (2), washer (3), and strap assembly (4) from top of door assembly (1).
2.
If strap assembly (4) is damaged, remove locknut (9), washer (8), bolt (5), washer (6), two bushings (7), and strap
assembly from door frame. Discard locknut.
1
2,3
7,8,9
(HIDDEN)
5,6
(HIDDEN)
4
417-048
3.
If necessary, install two lifting links (13), washers (11), bolts (10), and locknuts (12) on door assembly (1).
WARN I N G
Use extreme caution when handling heavy parts. Provide adequate support and use assistance during proce-
dure. Ensure that any lifting device used is in good condition and of suitable load capacity. Keep clear of
heavy parts supported only by lifting device. Failure to follow this warning may cause injury or death to per-
sonnel.
N OT E
Door assembly weighs 329 lb (149 kg).
4.
Attach sling and lifting device to lifting links (13) at top of door assembly (1).
5.
Remove 10 locknuts (14), 20 washers (15), and 10 bolts (16) from door assembly (1). Discard locknuts.
6.
Use lifting device to remove door assembly (1) from hinge (17) and place on flat surface.
7.
Remove sling and lifting device from lifting links (13).
Change 1
0015 00-2