TB 9-2320-364-13&P-2
DOOR APPLIQUE REPLACEMENT - CONTINUED
0015 01
REMOVAL
1.
Remove six bolts (19), washers (18), and rear view mirror (26) from door applique (13).
2.
Remove two socket head capscrews (24) and side reflector (25) from door applique (13).
3.
Remove four bolts (22) and washers (23) from bottom and middle of door applique (13).
4.
Remove two bolts (21) and washers (20) in front of window on door applique (13).
WARN I N G
Use extreme caution when handling heavy parts. Provide adequate support and use assistance during proce-
dure. Ensure that any lifting device used is in good condition and of suitable load capacity. Keep clear of
heavy parts supported only by lifting device. Failure to follow this warning may cause injury or death to per-
sonnel.
N OT E
Door applique weighs 206 lb (94 kg).
5.
Attach sling and lifting device to top of door applique (13).
6.
Remove two bolts (15) and washers (14) from door applique (13).
7.
Using lifting device, remove four remaining bolts (17), washers (16), and door applique (13) from side of cab.
8.
Remove sling and lifting device from door applique (13).
N OT E
Perform steps 9 thru 15 if new door is being installed. Retain hardware.
9.
Remove four bolts (32), washers (31), and threaded spacers (27) from door.
10.
Remove two bolts (34), washers (33), and threaded spacers (28) from door.
11.
Remove two bolts (2), washers (1), and threaded spacers (9) from door.
12.
Remove six bolts (3), washers (4), and threaded spacers (10) from door.
13.
Remove four bolts (5), washers (6), and threaded spacers (11) from door.
14.
Remove two bolts (7), washers (8), and threaded spacers (12) from door.
15.
Remove bolt (29) and door handle spacer (30) from door.
Change 1
0015 01-2
