TB 9-2320-364-13&P-2
HEADLIGHT AND COMPOSITE LIGHT REPLACEMENT - CONTINUED
0020 00
CLEANING AND INSPECTION
Clean and inspect all parts IAW General Maintenance Instructions (WP 0011 00).
INSTALLATION (CONFIGURATION A)
N OT E
The following procedure covers both left and right headlight assemblies (Configuration A).
Right headlight assembly (Configuration A) is illustrated.
1.
Position headlight bracket (5) over mounting holes on lower brush guard.
2.
Install two washers (4), bolts (3), washers (9), and new locknuts (10) to top of headlight bracket (5).
3.
Install three washers (15) and new locknuts (16) to bottom of headlight bracket (5).
4.
On right side only, install weight classification marker (2) to headlight bracket (5) with four washers (17), bolts (18),
washers (12), and new locknuts (11).
5.
Install composite light (21) to headlight bracket (5) with five washers (19), bolts (20), washers (14), and new
locknuts (13).
6.
Install headlight (1) to headlight bracket (5) with three washers (6) and new locknuts (7).
7.
Connect jumper harness connectors (8) to headlight (1) and composite light (21). .
10
9
8
7
6
5
4
3
2
1
11
14 13
12
4
3
15
18 17
16
19
417-026
21
20
CONFIGURATION A
8.
If equipped, place battery disconnect switch in ON position (TM 9-2320-364-10).
9.
Check operation of headlights and composite lights (TM 9-2320-364-10).
0020 00-4
