TB 9-2320-364-13&P-2
HEADLIGHT AND COMPOSITE LIGHT REPLACEMENT - CONTINUED
0020 00
REMOVAL (CONFIGURATION A)
N OT E
The following procedure covers both left and right headlight assemblies (Configuration A).
Right headlight assembly (Configuration A) is illustrated.
1.
Tag and disconnect jumper harness connectors (8) from headlight (1) and composite light (21).
2.
Remove three locknuts (7), washers (6), and headlight (1) from headlight bracket (5). Discard locknuts.
3.
Remove five locknuts (13), washers (14), bolts (20), washers (19), and composite light (21) from headlight bracket (5).
Discard locknuts.
4.
On right side only, remove four locknuts (11), washers (12), bolts (18), washers (17), and weight classification marker
(2) from headlight bracket (5). Discard locknuts.
5.
Remove two locknuts (10), washers (9), bolts (3), and washers (4) from top of headlight bracket (5). Discard locknuts.
6.
Remove three locknuts (16) and washers (15) from bottom of headlight bracket (5). Discard locknuts.
7.
Remove headlight bracket (5) from lower brush guard.
10
9
8
7
6
5
4
3
2
1
11
14 13
12
4
3
15
18 17
16
19
417-026
21
20
CONFIGURATION A
0020 00-2