TB 9-2320-364-13&P-2
LOWER BRUSH GUARD REPLACEMENT - CONTINUED
0019 00
REMOVAL - CONTINUED
N OT E
Use lifting device to support lower brush guard to allow removal of remaining components.
8.
Remove locknut (26), washer (25), bolt (22), washer (23), and blackout light bracket (24) from lower brush guard (3).
Discard locknut.
N OT E
Note location of spacers and stud plates to ensure correct installation.
9.
Remove four locknuts (32), washers (33), bolts (36), washers (35), and two spacers (34) from outside edges of lower
brush guard (3). Discard locknuts.
10.
Remove six locknuts (30), washers (31), bolts (27), washers (28), and stud plates (29) from lower brush guard (3). Dis-
card locknuts.
11.
Place lower brush guard (3) on flat surface.
12.
Remove lifting device, sling, and two lifting links from lower brush guard (3).
28
27
24
26
29
23
25
22
31
3
30
36
29
35
417-023
32
34
33
0019 00-4