II113301
Rev. -
Page 10
3.4.1.1 Install Driver's-Side Forward Applique Armor Panel (P/N 114602-1)
See Figures 2 and 3 for illustrations showing the location of hardware that is removed during the
Kit installation and the installation of the Driver's-Side Forward Applique Armor Panel
(P/N 114602-1).
a. Remove the Side Marker Light Assembly covers (2 ea) (retain the mounting
hardware).
b. Remove (drill out) screw heads from the Side Marker Light Assemblies (4 ea).
c. Remove and unplug the Marker Light Assemblies (2 ea).
d. Remove 4 nuts from the hinge bolts (see Figure 3). Counting from the top down,
remove nuts No. 1, 4, 7, and 10.
e. Remove 4 hex-head bolts / washers from the forward armor plate (see Figure 2).
f.
Install the Side Marker Light Assemblies and covers (2 ea) to the Forward Applique
Armor Panel (see Figure 3).
g. Stick Spacers (P/N 113318-3) over the holes on the Forward Applique Armor Panel
(4 places) using caulking or the equivalent (see Figure 3).
h. Lift the Forward Applique Armor Panel (P/N 114602-1) into place, plug in the Side
Marker Light Assemblies (2 ea) and attach the panel to the vehicle using the four
hinge bolts as a guide. Install 4 bolts / 4 washers into the forward holes. Apply
Loctite to 4 threaded spaces (P/N 114606-7) and install the 4 threaded spacers and
4 washers onto the hinge bolts (see Figure 3).
i.
Torque the bolts to the values in Appendix A.
3.4.1.2 Install Passenger-Side Forward Applique Armor Panel (P/N 114602-1)
Repeat Steps a through i from Section 3.5.1.1, to install the Passenger-Side Forward Applique
Armor Panel (P/N 114602-1).
See Figures 2 and 3 for illustrations showing the location of hardware that is removed during the
Kit installation and the installation of the Passenger-Side Forward Applique Armor Panel.
0037 01-17