|
| |
TM 9-2320-364-20-2
2-910
12. CODES 41 THROUGH 45 AND 51 THROUGH 53: SOLENOIDS J, F, D, C, B, A, G, E
OR H INOPERATIVE (CONT).
2.
Repair wire(s)
(Table 2-31)
(see schematic
Fig 2-22) or notify DS
Maintenance.
Verify repair, go to
Step 3 of this Fault.
YES
NO
With engine running and
transfer case in N (Neutral);
“TRANS CHECK” light ON and
associated codes.
“DO NOT SHIFT” light is OFF
and comes ON when shifted
into gear.
Solenoid or transmission
internal wiring OK.
Short/open in cab/transmission
wire harness.
KNOWN INFO
POSSIBLE PROBLEMS
TEST OPTIONS
REASON FOR QUESTION
Continuity test.
STE/ICE-R #91.
If solenoid or wiring from ECU to
transmission is faulty, ATEC will
register a code 41 fault.
WARNING
Is there
continuity
between
ECU connector MC10 and
harness connector MC19 on
the solenoid input and output
wires listed in Table 2-31?
Read WARNING
on Page 2-911
|
