| |
TM 9-2320-364-20-3
2-2150
11. REAR MANIFOLD CLICKS CONTINUALLY/LOW AIR LIGHT FLASHING (CONT).
25.
Is continuity to ground
measured at inflate valve
connector, terminal 1?
Replace rear manifold
(Para 13-9). Verify
repair, go to Step 28 of
this Fault.
YES
NO
System air pressure greater
than 110 psi (758 kPa).
Front manifold not clicking
continuously.
CTIS harness connections OK.
CTIS controller OK.
CTIS wire harness OK.
Air line 2994 and fittings OK.
CTIS rear manifold not leaking.
No air present at transducer.
10 to 14 vdc present at inflate
valve connector.
KNOWN INFO
POSSIBLE PROBLEMS
TEST OPTIONS
REASON FOR QUESTION
Continuity test.
STE/ICE-R #91.
If there is no continuity to
ground at inflate valve
connector, rear manifold is
faulty.
WARNING
CTIS rear manifold faulty.
Inflate valve solenoid faulty.
Inflate valve faulty.
Read WARNING
on Page 2-2151
|